Topstitching
Choose your seam. Follow your kit’s stitch spacing.
Seam type
Turned edgeTwo pieces, turned right side out.
Set up
1Fit the guide foot
Snap on a compatible stitch-in-the-ditch foot.
Open full guide →2Position the needle
Choose straight stitch. Set the needle beside the guide; check by hand.
3Test on scrap
Stitch a short line on scrap. Check spacing and tension.
Turned edge
4Turn and press
Turn right side out. Ease out the edge and press.
Pressing steps →5Topstitch
Guide against the edge. Stitch through both layers.
Corners and finishing
6Finish
Backstitch or overlap the start. Raise needle and foot; trim tails.
7Check
Even stitches on both sides. Press flat.
Credits [4]